GLORIA 480F / 510F
FIBER LASER TECHNOLOGY
Briefly, fiber laser light is created by banks of diodes. The light is channeled and amplified through fiber optic cable similar to that used for data transfer. The amplified light, on existing the fiber cable, is collimated or straightened and then focused by a lens onto the material to be cut.
FIBER LASER CUTTING WORKING PRINCIPLE
Fiber laser cutting machine is equipped with the most advanced international imported fiber laser source which generates powerful laser focused on objects to cause instant melting and evaporation. Automatic cutting is controlled by digitalized mechanic system. This hi-tech machine has condensed the advance technologies of fiber laser, digital, and precise mechanics.
FIBER LASER CUTTING MACHINE APPLICATION FIELDS
Applicable to fast cutting on plate or tube in metal, mainly for cutting on SS, Carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal; Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, hardware and metal processing.
FIBER LASER CUTTING ADVANTAGES
Fiber lasers are up to ten times more energy efficient than traditional YAG and Co2 laser systems. And, consuming little to no energy when not active, the annual energy savings can attract government grant funding for industrial energy efficiency programs.
Fiber laser have no mirrors to adjust or align, and no lamps to replace. Maintenance is minimal, so utilization and up-times are maximized. The laser really are designed as shop floor industrial tools.
Fiber laser machine is of low cost which consume very low electricity every hour. It has a lifespan of 1,00,000 hours. Fiber laser is maintenance free and its higher cutting speed and efficiency, speed of cutting plate can reach over 10 meters per minute.
Technical Specifications of Gloria Fiber Laser Cutting Machine 510F
|Working Area||4 x 4 Feet||4 x 8 Feet||5 x 10 Feet|
|Laser Type||Imported Original Fiber Laser|
|Laser Wavelength||1070 nm|
|Laser Output Power||300w / 500W / 750W / 1000W / 1200W|
|Cutting Tickness||0.2-5 mm|
|Max. Cutting Speed||30000 mm/min (Adjustable according to defferent cutting thickness)|
|Position Accuracy||≤ ± 0.04 mm|
|Minimum Line Width||≤ 0.12 mm|
|Cooling System||Water Cooling|
|Driving System||MITSUBISHI / YASKAWA Servo motor and Drivers|
|Transmission||X axis with imported ball screw, Y axis is imported square rail|
|Working Voltage||380V / 220V|
|Total Power Consumed||9 KW / 15 KW|
|Above Specifications are subject to change without prior notice.|